Titanium Bolt and Nut Manufacturer in Chennai
Nobel Weld is a titanium bolt and nut manufacturer in Chennai. We machine hex bolts, stud bolts, eye and lifting bolts and hex nuts in titanium Grade 5 and Grade 2, plus Monel, duplex and Inconel, to standard or special dimensions.
Titanium Gr 5 lifting bolts for the National Institute of Ocean Technology are an example of our promoters' work: the bar was sourced, cut, machined, inspected and supplied as one job.
Threads and heads from a titanium bolt and nut manufacturer
Titanium galls easily on its own threads. We cut threads with sharp tooling, check them with go/no-go gauges, and can recommend anti-seize or a dissimilar nut material where galling is a risk.
Where they are used
- Flange bolting in corrosive service
- Lifting and subsea hardware
- Marine and offshore equipment
How we make bolts and nuts
- 1Hex, heavy-hex, eye and lifting bolts
- 2Full-thread stud bolts
- 3Hex and heavy-hex nuts
- 4Thread gauge check and batch traceability
Materials
- TitaniumGr 1, 2, 5 (Ti-6Al-4V), 7, 12
- MonelMonel 400 (N04400)
- Duplex and super duplexUNS S31803/S32205, S32750/S32760, S32550
- Nickel alloysNi 200/201, Monel 400, Inconel 600/625, Incoloy 800/825, Hastelloy C-276/C-22
Material supplied with EN 10204 3.1 certificates and heat-number traceability.
Photos
Titanium Gr 5 lifting bolts, batch
Where we deliver
Bolts and nuts for Chennai, Tamil Nadu and India
From Chennai, we serve plants, OEMs and EPC contractors across Tamil Nadu and the rest of India, with EN 10204 3.1 certificates, heat-number traceability and export packing where needed.
- Chennai
- From our shop in Gowrivakkam to plants in Manali, Ennore, Ambattur, Guindy, Sriperumbudur and Oragadam.
- Tamil Nadu
- Coimbatore, Hosur, Tiruchirappalli, Thoothukudi, Cuddalore, Ranipet, Madurai and Mettur.
- India
- Gujarat, Maharashtra, Karnataka, Telangana, Andhra Pradesh and Kerala; export on ex-works, FOB or CIF terms.
FAQ
Bolts and nuts: common questions
What does your titanium bolt and nut manufacturing include?
Hex bolts, stud bolts, eye and lifting bolts, and hex nuts, in titanium and other exotic alloys.
How do you prevent titanium thread galling?
Sharp, well-formed threads, correct thread class, and an anti-seize compound or dissimilar nut material where needed.
Do you supply washers too?
Yes. Plain and spring washers can be machined or sourced in the same alloy.
Send the drawing for your bolts and nuts
Tell us the material grade, size and quantity, or send a sample. You get a technical and commercial reply within 48 hours.