Titanium Shaft Manufacturer in Chennai
Nobel Weld is a titanium shaft manufacturer in Chennai. We turn pump shafts, agitator shafts, valve stems and spindles in titanium Grade 5, Ferralium 255, duplex and super duplex, Monel and Inconel, with keyways, threads, flats and stepped diameters to drawing.
Exotic-alloy shafts are chosen when the shaft runs wetted in seawater or acid, or when strength-to-weight matters.
Straightness and runout from a titanium shaft manufacturer
Long, slender shafts in titanium and nickel alloys can bend under cutting load. We turn them between centres with steadies, check runout on every diameter, and mill keyways and flats on the VMC.
Where they are used
- Centrifugal and process pump shafts
- Agitator and mixer shafts
- Valve stems and spindles
- Worm and drive shafts
How we make shafts
- 1Turned between centres for runout control
- 2Keyways, flats and slots milled on VMC
- 3Threads cut to drawing
- 4Runout and dimensional report with each shaft
Materials
- TitaniumGr 1, 2, 5 (Ti-6Al-4V), 7, 12
- Ferralium 255UNS S32550, ASTM A182 F61
- Duplex and super duplexUNS S31803/S32205, S32750/S32760, S32550
- MonelMonel 400 (N04400)
- Nickel alloysNi 200/201, Monel 400, Inconel 600/625, Incoloy 800/825, Hastelloy C-276/C-22
Material supplied with EN 10204 3.1 certificates and heat-number traceability.
Where we deliver
Shafts for Chennai, Tamil Nadu and India
From Chennai, we serve plants, OEMs and EPC contractors across Tamil Nadu and the rest of India, with EN 10204 3.1 certificates, heat-number traceability and export packing where needed.
- Chennai
- From our shop in Gowrivakkam to plants in Manali, Ennore, Ambattur, Guindy, Sriperumbudur and Oragadam.
- Tamil Nadu
- Coimbatore, Hosur, Tiruchirappalli, Thoothukudi, Cuddalore, Ranipet, Madurai and Mettur.
- India
- Gujarat, Maharashtra, Karnataka, Telangana, Andhra Pradesh and Kerala; export on ex-works, FOB or CIF terms.
FAQ
Shafts: common questions
Which shafts does your titanium shaft manufacturing cover?
Pump shafts, agitator shafts, valve stems, spindles and worm shafts, plain, stepped, keyed and threaded.
Which titanium grade is used for shafts?
Grade 5 (Ti-6Al-4V) for strength; Grade 2 where corrosion resistance matters more than strength.
Do you give a runout report?
Yes. Every shaft ships with a dimensional and runout report.
Send the drawing for your shafts
Tell us the material grade, size and quantity, or send a sample. You get a technical and commercial reply within 48 hours.