Titanium CNC Machining in Chennai
Nobel Weld offers titanium CNC machining in Chennai on CNC turning centres and vertical machining centres (VMC). We machine titanium, nickel alloys, duplex and special stainless steels to your drawing, from single prototypes to repeat production batches.
Material, machining and inspection run under one order, so you receive finished parts with a dimensional report, not raw stock.
Machining capabilities
- CNC turning centres: turning, facing, boring, grooving and threading
- VMC: milling, drilling, tapping, pocketing and profiling
- Rings, covers, housings, sleeves, bushes and shafts to drawing
- Batch production of fittings, ferrules, nozzles and bolts
- Alloy-specific tooling, cutting speeds and coolant control for titanium, nickel alloys and duplex
- Dimensional inspection with calibrated instruments and reports with every batch
CNC turning centre 
VMC, vertical machining centre
Round and turned parts
Shafts, sleeves, rings, flanges, bolts and fittings, with repeatable batch production to close tolerance.
Titanium impeller with keyed bore 
Shafts and sleeves with milled flats 
Stepped pins, batch-turned 
Large turned rings and sleeves
Prismatic and milled parts
Blocks, manifolds, housings, plates and covers, with multi-face machining on dedicated fixtures.
VMC milling of a flange block 
Plates with drilled hole pattern 
Discs with pockets and slots 
Manifold block, drilled and tapped
Why titanium CNC machining in Chennai needs alloy-specific practice
Titanium conducts heat poorly and work-hardens, so heat stays at the cutting edge. We machine it with sharp carbide tooling, lower cutting speeds, steady feeds and generous coolant to protect the tool and the surface. Nickel alloys and super duplex get the same alloy-specific treatment.
Where we deliver
Precision CNC machining for Chennai, Tamil Nadu and India
From Chennai, we serve plants, OEMs and EPC contractors across Tamil Nadu and the rest of India, with EN 10204 3.1 certificates, heat-number traceability and export packing where needed.
- Chennai
- From our shop in Gowrivakkam to plants in Manali, Ennore, Ambattur, Guindy, Sriperumbudur and Oragadam.
- Tamil Nadu
- Coimbatore, Hosur, Tiruchirappalli, Thoothukudi, Cuddalore, Ranipet, Madurai and Mettur.
- India
- Gujarat, Maharashtra, Karnataka, Telangana, Andhra Pradesh and Kerala; export on ex-works, FOB or CIF terms.
FAQ
Precision CNC machining: common questions
What sizes can your titanium CNC machining in Chennai handle?
Send the drawing and we will confirm. Our CNC turning centre and VMC cover typical pump, valve and fitting parts such as shafts, sleeves, rings, flanges, blocks and fasteners.
Can you supply the material as well as machine it?
Yes. We source the bar, plate or forging with its 3.1 certificate, machine it and inspect it, so one order covers material and machining.
Do you machine one-off prototypes?
Yes. We machine single prototypes and repeat batches, with a dimensional report for each.
Send us your next exotic-metal enquiry
Share the drawing, material specification and quantity. You will receive a technical and commercial response within 48 hours.